ارتداء المشكلات في آلة المسمار من نفق الدرع
Problem Description
During shield machine excavation, the screw machine is used.
The blades are rotated inside the soil bin.
نتيجة ل, the slag inside the bin causes continuous wear on the blades.
Wear-resistant treatment must be applied to the part exposed from the soil bin.
عندما يدخل الخبث إلى برميل الآلة اللولبية, it changes from a scattered state to a gathered state.
Because of this transition, heavy wear happens at the barrel’s front section and the blades inside.
If no preventive measures are taken, serious problems may occur:
-
Performance parameters of the screw machine will be reduced.
-
The soil discharge rate will decrease.
-
The shield machine’s excavation speed will be slowed down.
Solution Proposal
To solve this issue economically, surfacing of wear-resistant materials is recommended.
Wear-resistant materials with about 5 mm thickness should be applied to:
-
The outer surfaces of the blades.
-
The blade panels.
With this method:
-
Friction will be buffered when the blades face slag wear.
-
Good wear resistance will be achieved.
-
Surfacing materials will be saved.
هكذا, the screw machine’s working life will be extended, and excavation speed will be maintained.
