Harga Lembaran Logam Corten
Corten sheet metal price is higher than galvanized steel on a per-pound basis, but the difference reflects its superior long-term performance.
- Galvanized Steel: lower upfront cost, suitable for short-term or high-humidity environments
- Lembaran Baja Corten: higher initial cost, but longer lifespan and minimal maintenance
- Keterangan
Corten steel sheet and galvanized steel sheet are two of the most commonly used materials in urban furniture, including benches, pekebun, layar, dan instalasi umum. While both offer corrosion resistance, they differ significantly in price structure, protection mechanism, and lifecycle performance.
Perbandingan Harga: Corten vs Galvanized Steel
Material Price Per Pound (Reference Range)
| Jenis Bahan | Price Per Pound (USD) | Initial Cost Level | Typical Lifespan |
|---|---|---|---|
| Galvanized Steel | 0.50 – 0.90 | Lebih rendah | 10 – 20 bertahun-tahun |
| Lembaran Baja Corten | 0.65 – 1.20 | Sedang (+15%–30%) | 25 – 50+ bertahun-tahun |
Corten steel sheet generally costs 15% ke 30% more per pound than galvanized steel due to its alloy composition and performance advantages.
Mekanisme Perlindungan Korosi
Baja Corten
- Membentuk kandang, self-protective rust layer (patina)
- Corrosion rate decreases over time
- No additional coating required
Galvanized Steel
- Protected by a zinc coating layer
- Zinc provides sacrificial protection
- Corrosion begins once the coating is damaged or consumed
Perbedaan Utama:
Corten steel relies on material-based protection, while galvanized steel depends on a coating system.
Performance Comparison in Urban Environments
| Performance Factor | Lembaran Baja Corten | Galvanized Steel Sheet |
|---|---|---|
| Ketahanan Korosi | Tinggi (after patina forms) | Sedang hingga tinggi |
| Pemeliharaan | Sangat rendah | Sedang (recoating required) |
| Jangka hidup | 25–50+ tahun | 10–20 years |
| Daya Tahan Permukaan | Integral to material | Coating may wear off |
| Climate Suitability | Best in dry/wet cycles | Better in humid conditions |
Fabrication and Processing
| Proses | Lembaran Baja Corten | Galvanized Steel Sheet |
|---|---|---|
| Pemotongan | Standar | Standar |
| Pengelasan | Straightforward | Requires ventilation (zinc fumes) |
| Perawatan Permukaan | Natural or pre-rusted | Factory-applied zinc coating |
| Post-processing | Minimal | Coating repair may be needed |
Corten steel is often preferred for custom fabrication due to fewer constraints during welding and finishing.
Aesthetic Comparison
Baja Corten
- Natural rust color ranging from orange to dark brown
- Surface evolves over time
- Strong visual integration with landscape and architecture
Galvanized Steel
- Silver-gray metallic finish
- Uniform and consistent appearance
- Limited visual variation
Corten steel is widely used in design-focused urban furniture, while galvanized steel is typically selected for functional or budget-driven projects.
Lifecycle Cost Comparison
| Faktor Biaya | Baja Corten | Galvanized Steel |
|---|---|---|
| Initial Material Cost | Lebih tinggi | Lebih rendah |
| Biaya Pemeliharaan | Minimal | Sedang |
| Replacement Frequency | Rendah | Lebih tinggi |
| Long-Term Cost | Lebih rendah | Lebih tinggi |
Although galvanized steel is cheaper initially, maintenance and replacement costs can make it more expensive over time.
Applications in Urban Furniture
Lembaran Baja Corten
- Landscape planters and raised beds
- Decorative screens and panels
- Public seating and sculptures
- Kelongsong arsitektur
Galvanized Steel Sheet
- Structural frames and supports
- Railings and fencing
- Utility and infrastructure components
- Cost-sensitive public installations
Key Factors Affecting Price Differences
- Alloying elements in Corten steel (tembaga, kromium, nikel) increase cost
- Zinc coating in galvanized steel is relatively economical
- Maintenance requirements significantly impact total cost
- Environmental exposure influences material selection
