Hard Facing Plate

Hard Facing Plate Complete Guide: What It Is, How It Works and Where to Use It

Hard facing plate is one of the most widely used wear protection materials in industries where equipment faces severe abrasion, impacto, y desgaste por deslizamiento. Unlike ordinary wear-resistant steel plates, hard facing plates combine a tough steel base with an extremely hard wear-resistant alloy layer to achieve longer service life.

For new buyers, understanding the basic structure, manufacturing methods, rango de dureza, and application fields is the first step before selecting the right wear solution.

This guide explains what hard facing plate is, how it works, which production technologies are available, and where it delivers the highest value.

1. What Is Hard Facing Plate?

Hard facing plate is a bi-metallic wear-resistant composite plate manufactured by depositing a high-hardness alloy layer onto a low-carbon steel or low-alloy steel base plate through welding or cladding technology.

The structure usually consists of two layers:

Capa	Función principal	Características de los materiales
Placa base	Provides support and impact resistance	Tough, soldable, easy to fabricate
Hard Facing Layer	Provides wear protection	Alta dureza, resistencia a la abrasión

The design principle is simple:

• The steel base absorbs impact and mechanical stress.
• The hard alloy surface sacrifices itself against wear.
• The equipment achieves longer operating life with less maintenance.

2. How Hard Facing Plate Works

Traditional steel components often fail because the surface wears away faster than the structure can tolerate.

Hard facing plates solve this problem by separating two requirements:

Requirement	Solución
Alta resistencia al desgaste	Hard alloy surface layer
Resistencia al impacto	Tough steel backing plate
Easy installation	Weldable composite structure

This combination allows hard facing plates to outperform normal carbon steel and many conventional wear plates in extreme abrasion conditions.

3. Hard Facing Plate Structure and Materials

The overlay layer is usually based on chromium-rich wear alloys containing:

• Partículas de carburo de cromo
• Carbón
• Molibdeno
• Níquel
• Other alloy strengthening elements

Durante la solidificación, hard carbide phases form inside the metallic matrix, creating exceptional resistance against abrasive particles.

Characteristic	Rango típico
Dureza de superposición	CDH 50-65
Placa base	Acero dulce / acero de baja aleación
Grosor de superposición	Commonly 3-15 milímetros
Resistencia al desgaste	Several times higher than ordinary steel

4. Four Main Hard Facing Production Technologies

Different cladding methods create different performance characteristics.

4.1 Soldadura por arco sumergido (SIERRA)

SAW is one of the most common industrial hard facing processes because it provides high deposition efficiency and stable quality.

Ventajas:

• High production capacity
• Uniform overlay thickness
• Adecuado para platos grandes

Aplicaciones típicas:

• Equipos de minería
• Cement machinery
• Large industrial hoppers

4.2 Soldadura por arco abierto

Open arc cladding does not require external shielding gas and is widely used for flexible production.

Ventajas:

• Lower equipment requirements
• Suitable for customized sizes
• Good field repair capability

4.3 Plasma Transfer Arc (PTA)

PTA provides precise heat control and is used where high-quality metallurgical bonding is required.

Ventajas:

• Baja tasa de dilución
• Excellent surface quality
• Precise alloy control

4.4 Revestimiento láser

Laser cladding is an advanced technology using concentrated laser energy to create a high-precision wear-resistant layer.

Ventajas:

• Mínima distorsión por calor
• High bonding quality
• Suitable for precision components

5. Hard Facing Plate vs Traditional Wear Steel

Material	Ventaja principal	Best Application
Hard Facing Plate	Extreme surface wear resistance	Ambientes de abrasión severa
NM400/NM500 Wear Plate	Dureza y tenacidad equilibradas	Impacto + abrasion conditions
Acero dulce	Low cost and easy fabrication	Low wear applications

For pure sliding abrasion, hard facing plates often provide better lifecycle value because the wear layer hardness is significantly higher.

6. Hard Facing Plate Application Map

Hard facing plates are widely used across industries where material flow causes continuous wear.

Industria	Componentes típicos	Wear Type
Minería	caídas, tolvas, trituradoras	Rock impact and abrasion
Cemento	Revestimientos transportadores, mill components	Mineral abrasion
Generación de energía	Sistemas de manipulación de carbón	Erosión de partículas
Industria siderúrgica	Equipo de transferencia de materiales	High-temperature abrasion
Puertos	Loading equipment, cubos	Sand and ore wear

7. How to Select the Right Hard Facing Plate

Before purchasing, buyers should evaluate:

• Wear type: corredizo, impacto, erosión, or combined wear
• Temperatura de funcionamiento
• Required hardness level
• Grosor de superposición
• Base plate strength
• Requisitos de fabricación

A higher hardness value is not always the best solution. Extremely hard overlays may require careful consideration in high-impact environments.

8. Common Hard Facing Plate Purchasing Mistakes

• Choosing only by hardness number
• Ignoring base plate toughness
• Using thin overlay thickness for severe wear
• Comparing price per ton instead of service life
• Buying without checking welding quality

9. Hard Facing Plate Solutions from Teda Ganghua

Teda Ganghua supplies advanced wear-resistant solutions for mining, cemento, acero, fuerza, y aplicaciones industriales pesadas.

Our wear protection products include:

• Placas superpuestas de carburo de cromo.
• Customized wear-resistant composite plates
• Industrial abrasion protection solutions
• Customized thickness, tamaño, and processing options

With professional material selection support, Teda Ganghua helps customers choose the right wear protection solution based on abrasion conditions, nivel de impacto, and equipment operating environment.

Learn more:

Placa de superposición de carburo de cromo

Conclusión

Hard facing plate is a high-performance wear solution that combines a tough steel base with an ultra-hard alloy surface. By separating structural strength from surface hardness, it provides longer service life in the most demanding industrial environments.

Para la minería, cemento, fuerza, acero, and port industries, selecting the correct hard facing technology and overlay specification can significantly reduce downtime, costos de mantenimiento, and equipment replacement frequency.